So , You've Purchased Patio Door Locks Repair ... Now What?

Patio Door Locks Repair

The security of your home is dependent on the locks that are installed on your patio door. When they aren't working correctly, it could compromise the security of your family and belongings.

It's simple to fix patio door lock issues with just a few steps. This quick fix is lubricating and cleaning the lock.

Inspect the Lock

Patio doors are an essential security feature. They need to be strong enough to withstand the elements and keep burglars out. Regular wear and wear, extreme temperatures and dust can cause door frames, hinges and locking mechanisms to fail. It's important to be on the lookout and regularly check your sliding doors for damage, and make any repairs needed.

Some of the most frequent problems with patio door locks are difficulties locking or unlocking them, a stuck latch and keys that do not rotate smoothly. Depending on the particular problem you're experiencing you may have to tighten screws or adjust the lock mechanism in order to get it working again.

If your patio door lock is stuck in the open position and you cannot open it, try using a flat-head or credit card. If none of these options are working, you should contact an expert locksmith who will help you open the patio door lock without causing damage to the frame.

The mortise lock on sliding uPVC patio doors is typically an cylinder and handle that secures the lock. They are secure, but can break or bend when a closed patio door. You should check the mortise locks and handles for signs of wear such as scratches or bends before they break and you have to replace them.

You can also take a photo of the lock to determine its dimensions and location. You can then give these details to a vendor if you are looking for an alternative lock. This will ensure that you're getting a lock that fits your door and is compatible with your current mounting configuration. Otherwise, you'll have an issue trying to install a new lock that's not compatible with the hardware you have. This could lead to more issues later on.

Clean the Lock

Patio doors are the most frequent point of entry into the home, and are therefore the most frequent target for burglars. It is therefore essential that your patio door locks are secure and up to Police & Insurance standards.

There are some simple things you can do to repair a lock that is refusing to cooperate. These four steps will help you to make sure that your patio doors are functioning properly and are providing the security you expect.

It is recommended to first clean the lock using hot soapy water and a damp cloth. You'll want to clean away any dirt or stains that might have built up on the lock. After this then you can use a dry cloth to wipe away any excess water and allow the lock to dry completely before trying to insert it again.

Then, you must lubricate your lock. This is especially important for uPVC doors that can become extremely squeaky as time passes. Spray lubricant like WD40 or petroleum jelly to lubricate keyways and internal mechanisms. When applying the lubricant ensure that you clean your key afterward to avoid spreading any dirt that may have gathered on it.

After cleaning and lubricating your uPVC patio door, you should test it. Check to see if the door is sliding in and out of the frame without a hitch. Also, make  sliding patio door repair  that the hinges and locking points are properly aligned with the frame of the door. You will notice alignment marks along the edge of the frame. You can easily fix the problem by re-aligning the doors with the frame.

It's also worth noting that there are various types of uPVC patio door locks and you might need to replace the lock if the one you have is damaged or broken. If you own E2011 patio door locks, you'll have to replace them to be safe with E2469 and E2487 lock assemblies. These assemblies consist of three components, including an E2014 mortise lock, escutcheon and a lock hasp.

Lubricate the Lock

The mechanism of the lock for most patio doors is hidden within the door. You can purchase a replacement kit at most home improvement stores and locksmiths if your key cylinder has been damaged or if you're looking to upgrade your lock to provide better security. The kits range from $10 to $20, and come with a tool for opening the lock and an extra key cylinder. The instructions in the kit will explain how to take apart and clean your old lock. Install the new lock. Depending on how securely the key cylinder fits in the hole in the lock it is possible to adjust it slightly to ensure it is operating properly.

Dry graphite powder can be used to lubricate locks. It is a low-cost and popular alternative to liquid lubricants which can attract dust and clog the mechanism. It is available at hardware stores or model train shops as well as some office supply stores. If you decide to use it, make sure the graphite chunk is free of wood particles. You can also purchase commercial graphite spray. The solvent in the spray disperses when it is applied, leaving behind a dry layer of graphite to lubricate the lock.

You can also lubricate your lock by spraying WD-40 in the keyway. Inject your key out several times to spread the lubricant across the lock. After some time, try the key once more and see whether it turns easily. If the key is still stuck you can try it again within a few days after the WD-40 has been allowed to dry.

Change the locks on your patio door is a straightforward task for most homeowners, however the process can be more complicated if have a sliding door with an invisible latch and a built-in deadbolt lock. If your patio door is fitted with an invisible latch, it will be required to remove the decorative interior cover by unscrewing screws that hold it in place. If your patio door comes with a deadbolt, it will be necessary to remove the bolt. Install the new lock after taking out the deadbolt assembly and the knob.

Replace the Lock

Patio doors are an important part of your home's security and it's normal for them to occasionally malfunction. There are times when debris can get caught in the lock mechanism or it can simply wear out due to the passage of time and use. A damaged or broken patio door latch could pose an extremely dangerous security risk to your home. Regularly inspecting patio door locks can help keep them in good shape and let you swiftly correct any issues.

If you can't fix the problem it's time to replace it. Most homeowners can perform this task on their own. However, it is important to carefully go through the directions to ensure that the new lock is compatible with your existing lock. It's also an excellent idea to bring the lock you have previously used to the store to ensure that a customer service representative can help you find a replacement.

To replace the handle on a patio door remove the handle. This can be accomplished by removing screws that keep the handle in place. Once the handle has been removed you will be able to remove the screws that hold the lock body in place.

After removing the screws you can remove the latch body from the door frame. Secure the lever with a graphite pen. It will fall into the frame if it isn't secured. The next step is to remove the door strike from the jamb. The hole where the lock hook is when the patio door is closed will be revealed. Once the door strike is removed, you can screw the new one in.

It is important to use larger screws when re-screwing the door strike. These will be used to secure it to the frame. Verify that the new strike is in alignment with the opening of the door frame and tighten both together.

There are a variety of locks for patio doors. The most popular is the central rail lock that is operated by a key. These locks bolt the doors into the frame at various points and when the key is inserted, all points must lock simultaneously. These locks offer a greater level of security than standard locking mechanisms and can often result in lower homeowner's insurance premiums.